Meyer Mica Line Array Loudspeaker
Description
MICA™ is a self-powered, three-way loudspeaker designed for vertical curvilinear arraying. A member of the MILO® family of high-power curvilinear array loudspeakers, the MICA loudspeaker is ideal for applications that do not require quite as much power and throw distance as MILO and where weight and size is a concern. The MICA compact highpower curvilinear array loudspeaker is equally applicable in a wide variety of applications such as touring, rental and fixed installations. MICA provides an excellent complement to a MILO main system for tours that are playing a variety of venues, being used as sidefills for large arenas and sheds and as the main system for smaller venues.
Technical Specification
ACOUSTICAL
- Operating frequency range 60 Hz - 18 kHz
- Free field frequency response 75 Hz - 17 kHz ±4 dB
- Phase response 1 kHz - 16 kHz ±30° Maximum peak SPL 138 dB
- Dynamic range: >110 dB
- Horizontal coverage: 100°
- Vertical coverage: Varies, depending on array length and configuration
- Acoustical crossover: 1000 Hz
TRANSDUCERS
- Low/low-mid frequency;
- Two high-power 10" cone drivers with neodymium magnets Nominal impedance: 4 ?
- Voice coil size: 2"
- Power handling capability: 1200 W (AES); 1800 W peak
High frequency
- wo 3" compression drivers
- Nominal impedance: 8 ?
- Voice coil size: 3"
- Diaphragm size: 3"
- Exit size: 1.2"
- Power handling capability: 360 W (AES); 720 W peak
AUDIO INPUT
- Type: Differential, electronically balanced
- Max. common mode range: ±15 V DC, clamped to earth for voltage transient protection
- Connectors: Female XLR input with male XLR loop output or VEAM all-in-one connector (integrates AC, audio, and network)
- Input impedance: 10 kΩ differential between pins 2 and 3
- Input level : Audio source must be capable of producing a minimum of +20 dBV (10 V rms, 14 V pk) into 600 Ω in order to produce maximum peak SPL over the operating bandwidth of the loudspeaker.
WIRING
- Pin 1: Chassis/earth through 220 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies.
- Pin 2: Signal +
- Pin 3: Signal -
- Case: Earth ground and chassis
AMPLIFIERS
- Amplifier type: Four-channel complementary MOSFET output stages (class AB/H)
- Output power: 3020 W (four channels; 2 x 950 W, 2 x 560 W); 6000 W peak
ACPOWER
- Connector: 250 V AC NEMA L6-20 twistlock, IEC-309 male, PowerCon, or VEAM
RIGGING
- QuickFly rigging with four captive GuideALinks in the bottom corners of two aluminum and steel end frames, secured with quick-release pins
Dimensions:
- 1052 mm x 340 mm x 452 mm
Weight:?
- ?68.04?kg