Technical Specification

ACOUSTICAL

• Operating Frequency Range: 35 Hz – 150 Hz
• Frequency Response: 36 Hz – 130 Hz ±4 dB
• Phase Response: 46 Hz to 120 Hz ±30°
• Maximum Peak SPL: 138 dB
• Dynamic Range: >110 dB
• Coverage: 360° for a single unit; varies with number of units and configurations

TRANSDUCERS

• Low Frequency
• Two 15" cone drivers
• Nominal impedance: 4 Ω
• Voice coil size: 4”
• Power-handling capability: 1200 W (AES)

AUDIO INPUT

• Type: Differential, electronically balanced
• Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
• Connectors: Female XLR input with male XLR loop output or VEAM all-in-one (integrates AC, audio, and network)
• Input Impedance: 10 kΩ differential between pins 2 and 3
• Wiring: Pin 1: Chassis/earth through 220 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies
  Pin 2: Signal +
  Pin 3: Signal –
• Case: Earth ground and chassis

AMPLIFIER

• Type: Two-channel complementary MOSFET output stages (class AB/H)
• Output Power: 2250 W (4500 W peak)
• THD, IM TIM: <.02%
• Load Capacity: 4 Ω each channel
• Cooling: Forced air cooling, two fans (one ultrahigh-speed reserve fan)

AC POWER

• Connectors: 250 V NEMA L6-20 (twist lock), IEC 309 male inlet, PowerCon, or VEAM

RIGGING

• Optional end-mounted QuickFly rigging hardware, with captive GuideALinks and quick-release pins; compatible with MICA compact highpower curvilinear array loudspeakers and accessories

Dimensions:

• 1052 mm x 572 mm x 559 mm

Weight:

• 82.55 kg; with rigging 97.52 kg