JBL VRX 918 Subwoofer
Description
18 in. High Power Powered Flying Subwoofer
The VRX918SP is a powered, suspendable subwoofer system containing a 2268FF neodymium magnet, patented Differential Drive®, 18" woofer in a front-loaded, vented enclosure. The VRX918SP was designed specifically for use in arrays with the VRX932LAP Line Array speaker and VRX-AF Array Frame. In addition it may also be used in arrays consisting entirely of VRX918SP subwoofers.
Technical Specification
- Power Rating 1500 Watts PeakLF: Dual-Bridged Technology™, Class D
- Frequency Range 31 Hz – 220 Hz
- Dimensions (H x W x D) 508 mm x 597 mm x 749 mm (20.0 in x 23.5 in x 29.5 in)
- Frequency Range (-10dB) 31 Hz – 220 Hz
- Maximum Peak Output 126 dB SPL at 1m
- Bandpass Nominal Impedance LF: 2 x 2 ohms
- LF Driver 1 x JBL 2268FF 457 mm (18 in) dual voice coil Differential Drive® woofer with neodymium-magnet
- Inputs XLR with loop through
- User Controls Input Attenuator (0-16 dB)Selectable 80 Hz or 120 Hz Low Pass 80 Hz High-Pass enable/disable for XLR loop thru.
- System Processing DSP based, resident in Input Module
- System Management DSP based limiters for mechanical and thermal protection
- AC Power Operating Range 90-132 VAC or 216-264 VAC, 50/60Hz
- AC Line Voltage User selectable: 120V/240V (-15%, +10%)
- AC Input Connector Neutrik PowerCon (NAC 3MPA)
- AC Loop Through Connector Neutrik PowerCon (NAC 3MPB)
- AC Current Requirements 6A per system at 120V, 3A per system at 240V
- Enclosure 18 mm birch plywood.
- Suspension / Mounting Optional VRX-AF line-array frame kit or 10 mm forged eyebolts
- Finish Black DuraFlex™ finish
- Grille Powder coated, black, 16-gauge perforated steel with acoustically transparent foam
- Net Weight (each) 38.5 kg (85 lb)
- Optional Accessories VRX-AF array frameSRX718S-CVR: Pull-over padded cover (works with WK-4S) SS4-BK adjustable satellite speaker pole WK-4S Caster kit
- Outputs 1 x XLR
- Nominal Impedance LF:?2?x?2?ohms